Contact Us


Need Help?

System Status | All Products | Training Webinars | Order Supplies | Contact Us
  • All Products
  • Visitor Management
  • Hardware / Consumables

ID150 Installation and Configuration

Learn how to set up your ID150 scanner for a successful Visitor Management launch

Contact Us


Need Help?

  • Emergency Management Suite
    EMS 24-25 Getting Started Site Setup EMS Webinar Links User Management Features & Functions Analytics & Reporting Troubleshooting EMS Resources 911Cellular: Integrations On-Demand Learning
  • Preparation & Response Training
    Getting Started NTI Webinar Links User Management Course Management Analytics & Reporting   Troubleshooting PRT Resources  Release Notes & Updates
  • PBIS Rewards
    Launching PBISR Webinar Links User Management  PBIS Rewards Feature/Function Overview  Analytics & Reporting   Troubleshooting   Hardware / Consumables On-Demand Learning Integrations   Release Notes & Updates  PBIS Rewards Specific Resources 
  • Compass
    Getting Started Webinar Links Data & User Management  Compass Curriculum for Students, Staff, & Families Compass Behavior Intervention Compass Mental Health + Prevention Compass for Florida - Character Ed, Resiliency, & Prevention Compass for Texas - Character Ed Analytics & Reporting   Release Notes & Updates  Additional Resources
  • Behavioral Case Manager
    Getting Started Webinar Links User Management  Feature/Function Overview  Analytics & Reporting   Troubleshooting   Release Notes & Updates  Resources / User Guides State Specific Guidance
  • Visitor Management
    Release Notes & Updates  Getting Started Webinar Links User Management  Feature/Function Overview Analytics & Reporting   Troubleshooting   Hardware / Consumables Resources  Integrations
  • School Check In
    Getting Started  SCI Webinar Links User Management  SCI Feature/Function Overview  Analytics & Reporting   Troubleshooting   Hardware / Consumables SCI Resources 
  • ALICE Training Institute
    User Management  ALICE Feature/Function Overview  ALICE Resources  Troubleshooting  
  • Detect
    Getting Started Detect Webinar Links Integrations   Detect Resources  Troubleshooting Release Notes & Updates 
  • Anonymous Tip Reporting
    Getting Started  P3 Webinar Links User Management  P3 Feature/Function Overview  Analytics & Reporting   Integrations   Release Notes & Updates  P3 Resources 
  • Resources
    Notices Downloads SIS Integration Billing
+ More

This guide provides step-by-step instructions to install, configure, and troubleshoot the ID150 Assure ID scanner for seamless integration with the Navigate360 Visitor Management System. Follow these instructions to ensure your scanner is properly set up for efficient visitor check-ins, accurate ID scans, and secure campus access. If you encounter any issues, refer to the troubleshooting section for quick solutions or contact Navigate360 Support for assistance.

 

 

ID150 Installation and Configuration

ID Scanner Drivers & Software Install

AssureID & ID-AIDD Installation Steps

Please Note: AssureID Sentinel requires an Installation Key that must be entered by a member of the Navigate360 team.

 
  1. Leave your ID scanner unplugged and log into the computer as an Administrator
  2. Go to Control Panel → Programs and Features, then uninstall any previous ID scanning software (if applicable)
  3. Download the installation file for AssureID Sentinal and ID-AIDD using the button below:

AssureID & ID-AIDD

  1. Open the Downloads folder and double-click on the 7zip file titled: “Install_Vx.x.xx_xx_xx_xxxx - New Installs.exe” to launch the first installation wizard
    1. If you have any issues opening the 7zip file, please unzip the file and then run the Setup.vbs file located inside of the Install_Vx.x.xxx folder
  2. Click Install Drivers to install the i-Dentify Document Reader Drivers
    1. Follow the prompts on the i-Dentify installation wizard before continuing
  3. Next, click Install AssureID to install AssureID Sentinel
    1. Follow the prompts in the wizard to complete the AssureID Sentinel installation
    2. Use the installation key (#####-#####-#####-#####-#####-2) provided by Navigate360 Tech Support
  4. After finishing the AssureID Sentinel installation, click the “x” in the top right of the AssureID wizard
  5. This will automatically launch the ID-AIDD wizard
    1. Follow the prompts on screen to complete the installation and click Finish
  6. Reopen Control Panel → Programs and Features and make sure that the below applications are showing as installed:
    1. AssureID Sentinel
    2. i-Dentify Document Ready Drivers (x64)
    3. ID-AIDD 1.1.0.0
  7. You should now see the AssureID icon showing in your System Tray (up arrow on the bottom right of the Windows Taskbar)
  8. Right-click on the AssureID icon and select Activate License
    1. Click the Activate License button in the bottom right of the License Activation popup that opens
    2. You should then see a Deactivate License button appear, indicating that your license has been successfully activated
  9. You can now plug in your ID scanner
  10. Important: Open the Windows File Explorer and navigate to C:\Program Files (x86)\SchoolCheckIN to find the Result folder
    1. This is where ID data will be staged, before being sent to Visitor Management
    2. Right-click on the Result folder and select Permissions
    3. On the Security tab, click "Edit…" and update the Users group to have Full Control permissions
    4. Then click Apply and OK

Navigate360 ID Scanner App Installation Steps

  1. Download the installation file for the Navigate360 ID Scanner app using the button below:

Navigate360 ID Scanner

  1. Open the Downloads folder on your computer and run the setup.exe file to launch the installation wizard
    1. Please install all dependency files if prompted
  2. After completing the installation, open the Navigate360 ID Scanner app using the shortcut that has been added to your Desktop
  3. Fill in the Building ID, District ID, and Station ID fields before continuing
    1. Your Building ID and District ID can be found on the Device Settings → ID Scanning Method page in Visitor Management
    2. Your Station ID should match the Serial Number on the bottom of your ID scanner
  4. You can now use the Minimize to System Tray button on the Navigate360 ID Scanner app to hide it from view
  5. If you would like to have the Navigate360 ID Scanner app start with Windows automatically:
    1. Open the Windows Start Menu and search for the Run app
    2. Open the Run app and type in Shell:common startup to open the Common Startup folder
    3. Create a shortcut for the Navigate360 ID Scanner app on your Desktop and drag it into the Common Startup folder

Final Steps

  1. Now that you have the required scanning software installed, you will need to perform an initial scan to finalize the connection between AssureID, ID-AIDD, and the Navigate360 ID Scanner app
  2. Perform an “initial” scan by inserting a Driver's License into the scanner 
    1. Note: The ID data from this scan will not be pushed to Visitor Management, this scan is merely forming the connection between AssureID, ID-AIDD, and the Navigate360 ID Scanner app
    2. All future scans will be pushed to Visitor Management 

Congratulations, you are all set to start scanning Driver's Licenses in Visitor Management!

 

 
 

ID150 Troubleshooting

ID Scanner Troubleshooting

If your ID scanner is not pulling Driver's License data into Visitor Management, please follow the steps below to troubleshoot and resolve the issue

NOTE: This article only covers Staff-Assisted ID card scanners, such as the Acuant ID-150. If you are needing assistance troubleshooting another ID scanning method, please see our other troubleshooting guides here.

 

 

Test the Connection Between Your Scanner and Computer:

  1. Make sure that the scanner is plugged directly into the computer and not through a USB hub or dock.
    1. If your scanner was previously working on this computer, try power cycling the scanner by unplugging the USB and power cables for at least 15 seconds before reconnecting. Then log into Visitor Management and try scanning an ID.
    2. If issues persist, please continue to the steps below.
  2. Next we will check the the scanners ability to scan outside of Visitor Management, using a stand alone application included with your AssureID installation: Reveal ID.
  3. Open the Windows Start menu and search for/open the Reveal ID app. Ensure that your scanner is plugged into the computer.
    1. If the scanner is connected properly, at the bottom of the window you will see Scanners connected followed by the make/model/serial # of your scanner.
    2. Insert an ID into the scanner to make sure it can successfully pull the data from the ID. If successful, you will see the Driver's License data displayed in Reveal ID.
  4. If the scanner is not showing as connected in Reveal ID, it issue could be the USB cord or the scanner itself:
    1. Try unplugging the USB cord from the back of the scanner and plugging it back in to ensure proper connection. 
    2. Try using a different USB port on the computer. 
    3. Try using a different USB cable. 
    4. If the scanner continues to have issues connecting to Reveal ID, please check the Printers & Scanners settings in Windows to verify that it is showing as connected. It could be that your scanner is damaged and needs to be replaced.

Verify the Required Software is Running:

  1. The following software applications are required and must be running on the computer in order for Visitor Management to communicate with your locally installed scanner.
    1. AssureID:
      1. AssureID is a background process that can be located in the System Tray (up arrow) in the bottom right of the Taskbar. 
      2. Right-click on the AssureID logo and select "AssureID Settings…". Navigate to the Service tab and make sure that Service Status shows it as Running. If not, click Start.
      3. If you do not see AssureID running in your System Tray, you can open it from the File Explorer folder: “C:\Program Files\Acuant\AssureID\bin”. Locate and open the file named: AssureTec.AssureID.Platform.SystemTray.exe.
    2. ID-AIDD:
      1. ID-AIDD is a background app that can be found in the Windows Task Manager under Processes. 
      2. If you do not see it running, you can open it from the File Explorer folder: “C:\Program Files (x86)\ID-AIDD”.
    3. Navigate360 ID Scanner App:
      1. The Navigate360 ID Scanner app is a background app that can be located in the System Tray (up arrow) in the bottom right of the Taskbar. 
      2. If the app is not showing in your System Tray or Taskbar, you should be able to launch it from the computer's Desktop. 
      3. It is important that this app remain open, you can use the Minimize to System Tray button to hide the app from view without closing it completely.
  2. If you found that any of these applications were not running, please log into Visitor Management and try scanning an ID.
  3. If issues persist, please continue to the next section.

Note: You can also ensure that these applications are set to start with Windows. Open the Run app from the Start menu or by pressing the Windows key + R on your keyboard, then type in “Shell:common startup” and press Enter. If any of these applications are missing from the folder that is opened, please create shortcut for the app and place it in this folder.  

 

Verify the Settings Saved in Visitor Management and the Navigate360 ID Scanner App:

  1. Log into Visitor Management and navigate to Device Settings by clicking the gear icon on the Side Navigation menu. Then select the ID Scanning Method tab.
  2. Ensure that you have the correct Scanning Method selected for your ID Scanner.
  3. Make sure that the Scanner has been added correctly on the ID Scanning Method page. It should show in a box containing the Name and ID of the scanner, located directly under the Add Scanner fields.
    1. While the Scanner Name can be anything you would like it to be, the Scanner ID must match the Serial Number located on the bottom of the scanner. 
  4. Verify that the Scanner ID in Visitor Management matches the Serial Number as it is shown on the bottom of your scanner, including capitalization. 
    1. If no scanner is showing on the ID Scanning Method page, enter a name of your choice into the Scanner Name field and the Serial Number from the scanner into the Scanner ID field. Then click Add Scanner.
  5. Next, open the Navigate360 ID Scanner App from your System Tray and verify that the District ID, Building ID, and Station ID fields match what is shown on your ID Scanning Method page.
    1. The District ID and Building ID are both located in the information box near the middle of the page.
    2. The Station ID should also match the Serial Number on the bottom of your scanner. Same as the Scanner ID from the previous step above.
  6. If you continue to experience scanning issues after checking the above settings, it could be that the incorrect permissions are set for the Result folder that data is temporarily written to before being sent to Visitor Management. Note: the following steps will require Administrator access to the computer.
    1. You can locate the Result folder in File Explorer by navigating to “C:\Program Files (x86)\SchoolCheckIN”.
    2. Right-click on the Result folder and select Properties. 
    3. Go to the Security tab and select the Users group in the upper window. Then verify that “Full control” is set to Allow in the lower window.
      1. If you needed to apply Full Control access permissions to the Users group, please insert a Driver's License into your scanner and wait for it to be ejected. This scan will not display in Visitor Management as it is forming the connection between the Result folder and the Navigate360 ID Scanner App. All scans thereafter will be sent to Visitor Management to complete the Visitor Check-in.

Congratulations, your scanner is now connected to Visitor Management and your software settings are configured for all future scans!

 
 

 

Your browser does not support HTML5 video.

 

setup configuration

Related Articles

  • How to Configure User Notifications for Panic Button Low Battery Alerts
  • How to View Images on Maps in EM
  • How to set Up 2D Scanner
  • ID Scanner Drivers & Software Install
  • All Products | Training Webinars | Order Supplies | Contact Us
  • ©2024 Navigate360

Definition by Author

0
0
Expand