Reset Notify360 Panic Button
How to reset your Notify360 Wearable or Wall Mounted Panic Button
- Emergency Management
- Preparation & Response Training
- PBIS Rewards
-
Compass
Getting Started Webinar Links Data & User Management Compass Curriculum for Students, Staff, & Families Compass Behavior Intervention Compass Mental Health + Prevention Compass for Florida - Character Ed, Resiliency, & Prevention Compass for Texas - Character Ed Analytics & Reporting Release Notes & Updates Additional Resources
- Behavioral Case Manager
- Visitor Management
- Connect360
- School Check In
- ALICE Training Institute
- Detect
- Anonymous Tip Reporting
- Hall Pass
- Resources
- Back-to-School
During troubleshooting, you may need to reset your panic device to be reconfigured. Follow the steps below to rest your device.
Note: You’ll need the small reset pin/paperclip to reset the device.
For wall mounted units, remove them from the wall to access the white unit inside the button.

- Press and Hold the Battery Button: Locate the Battery Button on the BadgeR+ device and press it firmly.
- Press the Reset Button: While continuing to hold the Battery Button, use a paperclip or similar small tool to press the Reset Button through the pinhole on the device’s casing.
- Release the Reset Button: After pressing the Reset Button, release it, but continue holding the Battery Button for an additional 5 seconds.
-
Verify the Reset: Once the reset is completed, the device will:
- Vibrate once.
- Display the current charge level on the Battery Indicator Lights
- Wearable Panic Buttons only: Cycle the Status Indicator Light through RGB colors (red, green, blue, then white) within 5 seconds.
The device is now reset and must be reconfigured before use.